|
Amplifiers allow you to get the most out of your speakers and head unit by amplifying the signal. When using subwoofers, component systems, and loudspeaker components, this is the only way to go. A wide variety of models and power levels are available. Your authorized dealer will know exactly what you need.
600-Watt 4-Channel Power Amplifier With Electronic Crossover
Slope-selectable variable electronic crossover - Each of the Power Series amplifiers is equipped with a variable electronic crossover capable of setting the slope rate at 12Db or 24dB per octave. The crossover adjustment range is from 32Hz to 320Hz. This allows for optimum vehicle and subwoofer tuning to a specific vehicle cabin.
Dynamic Bass Optimization™ (DBO) circuit - This provides variable filtering with adjustable ¿Q¿ below 100Hz, far beyond conventional ¿Bass Q¿ circuits, by allowing the lowfrequency output to be optimized for specific subwoofer applications. Frequencies below an enclosure's tuned frequency can be attenuated, preventing damage to the subwoofer and allowing the amplifier's power to be better utilized. This circuit is also fully defeatable in the event outboard processors are being used.
Direct-Connect - Allows the use of 4 - 8-gauge power and ground cable to ensure enough juice is being delivered. No need for adapters or special fittings.
Full-range preamp outputs - In the event that multiple amplifiers are used in an application, this feature allows for streamlined system hookup. No high-loss Y-adapters or splitters needed!
Common-dimension amplifier footprints - By designing all of the Power Series amplifiers with two common dimensions, the amount of space occupied in multiple-amplifier mounting applications can be optimized.
Internal-lighting-ready - Each model is equipped with internal lighting mounts in the event that internal lighting is desired.
- 75W x 4 into 4 ohms
- 150W x 4 into 2 ohms
- 300W x 2 into 4 ohms, bridged
- Max Power : 600W Peak x 2
- Signal-to-Noise Ratio : >95dB
- Total Harmonic Distortion : 0.04%
- Frequency Response : 10Hz - 45kHz ±1dB
- Built-in variable electronic crossover with selectable slope
- Dynamic Bass Optimization™ (DBO) circuit
- Preamp outputs
- Differential inputs
- Internal-lighting-ready
- Direct-Connect
- Dimensions (H x W x D) : 21-13/16" x 12-1/4" x 2-9/16"
|
