KSC-SW1Powered Subwoofer System with Passive RadiatorKey Features | 160mm Silver-coated Cone Woofer | | Passive Radiator System | | Aluminium Die-cast Chassis | | 150W Maximum Output Power | | Supplied with Wired Remote (Gain/LPF Frequency/Phase Switch) |
Speaker Features | Speaker System | Active subwoofer system with Passive radiator | | Speaker Type | Subwoofer | | Speaker Size | 160mm | | Oversized Dimension | Yes | | Passive radiotar system | Yes | | Magnet Type | Ferrit | | Terminals | 10-pin connector cord | | Wired remote included | Yes | | Cross-over Network | Built-in | | Amplifier Included | Built-in |
Amplifier Features | Maximum Output Power | 150W | | Low-pass Filter | Yes | | Phase inverter 0°(Normal) / 180°(Reverse) | Yes | | Power Indicator | on the remote | | Line in | RCA | | Speaker level Input | Yes | | Chassis | Aluminum Die-cast | | Yes | | DC cable Supplied | yes |
Speaker/woofer Specifications | Woofer Cone material | Silver-coated Cone | | Aluminum Die-cast | | Subwoofer Impedance | 2Ω x 2 |
Amplifier-Specifications | Maximum Power Output (4Ω) | 150W x 1 | | Input Sensitivity | 0,05 ~ 1V | | Input Impedance | 2,2kΩ | | Signal to Noise Ratio | 85dB | | Frequency response (+0dB, -3dB) | 35Hz ~ 120Hz | | Operating voltage | 14,4V (10,5V ～ 16V allowable) | | Dimensions (WxHxD) | 400 x 91 x 228(mm), | | Weight | 3,6kg | | Current Consumption | 8A |
Accessories | Remote control | | | Bracket A: 2 pieces | | Bracket B: 2 pieces | | Bracket C: 1 piece | | Cushion: 2 pieces | | Machine screw (M4x6): 6 pieces | | Tapping Screw (5x16): 6 pieces | | 10-pin connector cord | | Velcro Tape: 1 piece | | RCA Cord: 0.5 meter |
|
